To summarize from the thread that Major Stackings linked , sounds like Acetone is the best general solution, as it melts the pieces together until they are permanently bonded together as one bit of plastic. You only need acetone, no need for other products or ABS chips. Just brush acetone on both pieces, join them and wait 5 minutes. You will find that your two pieces now are literally one piece. There is not anything stronger for abs plastic.
If you don't mind a little extra work, using melted ABS is probably your best bet, you just need to chop up some scrap ABS into shavings I used a big drill bit on some ABS and it made shavings very quickly , and then put them in some acetone. Play with the mixture until it comes out to your desired consistency. Make it in a squirt bottle, use it just like epoxy or whatever.
This way, the entire work piece is made of ABS plastic so you shouldn't have problems with thermal expansion leading to cracks or separation like you can have with other materials. If there isn't a tight fit though, Acetone alone might not be enough, and you can either melt a little plastic in Acetone solution to generate filler, or try other plastic-friendly glues that can both fit gaps and bond:. Right, assuming the parts that need to be glued are already a nice snug fit. We just finished putting together the Volkswagen T1 Camper Van.
It is notorious for the roof coming apart, as is the usual lego problem of the walls around doors often come apart.
In less than 3 minutes a part was VERY secure and won't come apart. You have to work fast as it is immediately affecting the plastic. Honestly, at less than a minute it won't come apart, and if you don't seat them securely, they will fuse out of place, so be careful. It didn't take more than a VERY light glaze with a paintbrush. I am SOLD and wish we had this years ago!
Last one I tried was a plastic welding glue for sheet plastic and acrylics. Melted pieces from the inside out. But once set, it was indestructible. I once brought a miniland sized model from London to the US in my main suitcase that had been glued with MEK and the model was fully intact when I got to the other end! As others have said, it is VERY nasty when breathed in. Do not even think about using it in confined spaces without a proper extraction system seriously and if you get any on your skin wash it off immediately.
If you ever spill a bottle of it inside, evacuate the building immediately - believe me, even the LEGOLAND masterbuilders do this if they ever spill it. When gluing - you only need a little brushed onto the brick - easiest to use a syringe of some similar device to put the glue between the studs - then apply the second brick. Wait a few minutes, and it's pretty well welded together. If gluing a large amount of bricks, do one row at a time and wait a few minutes between rows. Don't rush it or apply too much glue as the bricks will melt.
I use a small bottle of Gorilla super glue for my lego parts. It only squirts a tiny amount to be sure super glue doesn't get all over your parts, and also dries at a mid-range pace. I use it a lot to glue my Tiny Tactical parts to the guns after they come in the mail which are insanely small parts and the glue work like a charm. We tried all kinds. Solvents just didn't cut it and only made the bricks stick tighter.
The best we found is actually found at the hardware store in the plumbing aisle. Oatey all purpose cement is the best we found so far. This Super Glue tube in this pack of 12 comprises 2g of adhesive that forms the strongest bonds in tight joints between smooth surfaces and clean breaks. It comes packaged in a handy and reusable container. The glue gives the best results with nonporous surfaces and hence would make the best choice for securing your Lego structure.
This glue bonds instantly and sets in seconds. This original formula of super glue can be used on most plastics, aluminum, metal, wood, ceramics, pottery, and more. This glue promises excellent coverage regardless of whether you are using it on a big or small surface.
The brush applicator makes it easier to control the glue during application. The brush-on applicator provides wide surface coverage. You can also glue hard to reach areas with it. The no-clog bottle ensures that you can dispense the glue quite easily. The brush remains fresh and the bristles stay loose despite repeated use. This super-strong glue dries quickly and is suitable for use on your Lego structure. Krazy glue has a versatile formula that makes it suitable for office, home, and crafting applications.
It can bond to ceramics, wood, vinyl, plastic, metal, and more. This is the only glue you would ever need while looking for an instant adhesive. It can bond virtually everything regardless of the surfaces being the same or dissimilar. It is perfect for bonding vinyl, plastics, wood, canvas, fabrics, glass, metal, ceramics, rubber, and more. This triple distilled adhesive works well on all materials where other glues fail.
This formula is perfect for impacts, vibrations, heat, moisture, and shock. The thicker gel will not dry out or clog. This means that it will hold up even during play—or drops.
This is a great adhesive for Legos when it comes to ease of application with a quick dry. BrickShield Brick Spray is one of the most trusted brick glue adhesives for brick lovers around the world.
This is a spray-on glue that is applied to the Lego set in a thin coating that binds and holds against all use and abuse. The BrickShield Brick Spray is water-soluble, which means that it will come off completely when washed with warm water. With a clear drying sheen, this spray on glue is virtually unnoticeable as well. This is the perfect adhesive for Lego lovers who want their playsets to hold together under use, but only for as long as they wish.
Our team at Cleaning King knows glue, and we make it our mission to help relay our knowledge to you. When buying any glue, you would normally always want the glue to last forever. That is, afterall, the purpose of glue. However, when it comes to Legos, permanence might not always be what you are looking for.
So, with this in mind, you should always consider how permanent you want your hold to be. Temporary versus permanent should be your 1 thought when buying glue for Legos. Applying glue to Legos is sometimes a bit of a messy task. You can also choose to use spray on adhesives which can be easily applied in a thin coating after building.
The choice is yours, but is something that should be considered! Durability is one of the most important aspects of an adhesive, especially for models and Lego playsets. You want something that can hold your bricks together when the set is being used or played with. This means that you want to look for a glue that can absorb shock, and maintain a hold even under a bit of stress.
Super Glue formulas are going to be the strongest hold, but these come at the price of being irreversible once applied. If you are looking for a temporary glue, make sure to use one that is designed for Legos specifically. Lego sets are designed to be attractive and fun.
They are made to be shown off, played with, and looked at by all. That means that you will likely want them to look just as good as they were meant to. Maintaining aesthetics is difficult to do with glues that dry white or discolored. This means you will want to find a glue that dries clear every time. When it comes to choosing the best glue for Legos, there are no shortage of options available to you.
It all comes down to your own experience level and needs in general. It is easy to use, dries quickly, and applied evenly with very little mess or fuss.
It is a permanent adhesive, which should be noted. However, for hold, longevity, aesthetics, and ease of use, it is hard to beat. Our team at Cleaning King makes it our mission to research and answer the tough questions about repair and cleaning at home. For hobbyists or DIY lovers, we have the answers you are looking for.
Whether or not you glue your Lego sets is up to you ultimately. Many collectors will choose to glue their sets together for better durability when displaying them. Other Lego lovers will glue their sets to keep them in-tact when playing with them. Rhino is leading for a long time in the permanent glue-market because its glues feature a very thick formula with a strong bond.
In short, this glue is only applied in the long term projects. This impact-resistant formula keeps project hardened and sturdy allowing no vibrations of the construction. Adding vinyl gets easier with this Rhino glue. The Glue Masters professional Grade Cyanoacrylate is a permanent adhesive for several materials like fabrics, Legos, wood shoe sole, etc. This Cyanoacrylate-Based Hobby Glues comes in different viscosities keeping the different workpieces in mind.
This solvent is easy to stay in control of when using. The three different versions, thick, thin, and medium viscosity are designed for different sectors.
It is completely shock-resistant and the bond will not break if it drops. The solvent requires a minimal amount of use and it lasts for ages. It is also used in underwater DIY projects. It is formulated for glasses, bricks, rubber, wood, plastic, and ceramic. This White glue also works on Legos providing a long-lasting permanence. It is easy to control using the tip of the package. The bottle tip is thin and crafted for tight places.
It affords precision in the application even for the waterproof Lego structures. The Gorilla spray adhesive sticks several materials and has a multi-purpose adhesive formula. It attaches everything with the perfect nozzle like metal, wood ,paper, fabric, and glass.
The adhesive nozzle has a fine tip for applying it in tight and small spaces. It affords precision and stability together. The no-drip formula keeps the outer Lego surface neat and clean. The transparent solvent meets the VOC standard taking only seconds to dry. The product comes with a wide pad for ensuring the proper control of it with one hand while application. It has a spray-nozzle that works on both undecided and pre-decided structures.
There are different types of adhesives, depending on the material you will stick your Lego with. The lego glue that works on plastic might not work on wood or stone.
So, on this basis, adhesives for legos are divided. Let us know about it! These are the adhesive that you can use for legos. But if you want perfection when attaching legos, you should get your hands on the polyurethane. If you want the structure to stand forever, you can get your hands on the adhesives.
0コメント